If you are looking to install roller shades, then you are probably wondering how to properly install these windows treatments. In this article, you will find instructions for installing ceiling-mount roller shades, inside-mount roller shades, and cordless shades. You can also read tips on cleaning cordless shades and ceiling-mount roller shades. Regardless of your type of window covering, these tips can help you install roller shades properly and enjoy them for years to come.
Installing cordless roller shades
If you are not familiar with installing cordless roller shades, here’s a quick video to show you how to install these window treatments. It will only take you about 1 minute to install a cordless shade and includes a few basic tips. First, you should line up the front bracket with the corner bead of the inside window frame. Once you have done this, you can proceed with installing the front clip and the back bracket of the shade.
Generally, cordless roller shades rely on a spring motor to raise and lower. To ensure that the spring is properly tensioned, many manufacturers do this before shipping the window treatments. However, the effects of transportation and unpacking can affect spring tension. The result is that some window shades will have too much or too little tension, which can make them impossible to roll up or down. To correct this problem, install the shades according to manufacturer specifications and follow the instructions carefully.
Installing inside-mount roller shades
To install inside-mount roller shades, follow these steps: assemble the brackets on the wall and window frame, then attach the shade’s ends to the brackets. Make sure to install the retractable plunger end first. Then, insert the other end into the slots. When finished, roll the shade up tightly to secure it. If you have any trouble or concerns, contact a professional installer. Afterward, install the window treatments as directed.
Before assembling the shade, ensure that the brackets are level. The brackets must be 1 3/8″ wider than the fabric. Make sure that the brackets are evenly spaced and that they are not touching each other. Once installed, insert the shade into the brackets. To attach them to the brackets, use two screws. Then, secure the brackets to the wall. Make sure to use proper fasteners.
Cleaning cordless roller shades
Clean your window shades properly and they will last longer. There are a few ways to do so. First, make sure to close your windows during windy or rainy weather. You should also vacuum and treat any stains regularly to keep them looking newer longer. It’s not hard to do, and will save you money in the long run. Using a damp cloth on the fabric is also a good idea. You should also follow the instructions on the package to get a spotless shade.
Lastly, consider the height of your window treatment. If the ceiling is higher than a person’s head, operating and cleaning cordless window treatments will be more difficult. This is where automatic lift systems come in handy. They are easy to operate and can even be controlled remotely. When installed correctly, the shades will last longer. And because they don’t require manual operation, they are perfect for rooms with high ceilings. Choosing window coverings that are cordless will give you more peace of mind.
Installing ceiling-mount roller shades
If you’ve ever tried installing ceiling-mount roller shades, you’ll know how much work this task can be. Before installing them, make sure you’ve measured the window and bracket location. Next, attach the brackets to the wall or window frame. The brackets should have the slotted end facing the ceiling. Slide the shade into the slotted end of the bracket on the opposite side. Once it is secured, insert the opposite side of the shade into the bracket.
Once the brackets are in place, install the shade. The outside bracket should be at least 1/4″ away from the wall. This will allow the shade to move freely and will keep them level. Be sure to measure the distance from the brackets to the window frame, and ensure that they are set at the right distance. You might need to use anchors if your brackets are mounted on concrete, brick, or aluminum. Make sure to pre-drill holes in the brackets so that they are easier to insert the screws.